Fusion 13.5t
5 posters
Fusion 13.5t
Ok so today we had our Fun meeting 12-7pm at wsmcc and wow this set up is amazing i ran 4cell 3300gps
and they lasted and held the power throught out the entire race was dead inpressed, my only concern is trying to change my accelration from linear to either hard or soft setting with
the programming card
I think i did it wrong has any one else had any issues with this?
and they lasted and held the power throught out the entire race was dead inpressed, my only concern is trying to change my accelration from linear to either hard or soft setting with
the programming card
I think i did it wrong has any one else had any issues with this?
Re: Fusion 13.5t
also dont forget as you are using cells the weight needs to be 1150 Grams
Gazza- Posts : 1530
Join date : 2009-11-29
Age : 64
Location : TRACKSIDE
Re: Fusion 13.5t
So are you using ABS then
Gazza- Posts : 1530
Join date : 2009-11-29
Age : 64
Location : TRACKSIDE
Re: Fusion 13.5t
Heres the pics i mentioned not very clear but none the less there here lol
[You must be registered and logged in to see this image.]
this being my abs pug 205 shell
[You must be registered and logged in to see this image.]
and thats the internals of the car
[You must be registered and logged in to see this image.]
this being my abs pug 205 shell
[You must be registered and logged in to see this image.]
and thats the internals of the car
Re: Fusion 13.5t
Hi Jamie,
I've just put the same speedo in my kit standard chassis. I bought the prog card and have changed a few of the settings, just to make sure I was doing it all right. I've managed to make the car have reverse too so I'm guessing it is working fine!
However, it took me a couple of tries to sort it out. It turned out that while I was changing this and that on the card, I was not downloading to to the ESC afterwards. As a result nothing changed. You have to scroll through almost all the options until you get to #28 - "Down Load" and then press the "+" button to conform that you wish to go ahead. The unit thinks about it all for a while, beeps once a second while it does this and then gives you the OK signal.
I'm setting mine back to standard settings for Monday to see how it goes like that and then will fiddle with one setting at a time...
J
I've just put the same speedo in my kit standard chassis. I bought the prog card and have changed a few of the settings, just to make sure I was doing it all right. I've managed to make the car have reverse too so I'm guessing it is working fine!
However, it took me a couple of tries to sort it out. It turned out that while I was changing this and that on the card, I was not downloading to to the ESC afterwards. As a result nothing changed. You have to scroll through almost all the options until you get to #28 - "Down Load" and then press the "+" button to conform that you wish to go ahead. The unit thinks about it all for a while, beeps once a second while it does this and then gives you the OK signal.
I'm setting mine back to standard settings for Monday to see how it goes like that and then will fiddle with one setting at a time...
J
JimboJames1972- Posts : 123
Join date : 2011-05-15
Age : 51
Location : Bury St Edmunds, SUFFOLK
Re: Fusion 13.5t
Looks good guys but I notice you are running NiMhs so there for you will need Lead weight to 150Grams adding
Gazza- Posts : 1530
Join date : 2009-11-29
Age : 64
Location : TRACKSIDE
Re: Fusion 13.5t
Finaly got the Shell done BY Colin and i have to admitt its looking awsome
as you will see on mondaY James , im gona try the settings now and listern for the beep
150grams my cars like the titanic lead weight
as you will see on mondaY James , im gona try the settings now and listern for the beep
150grams my cars like the titanic lead weight
Re: Fusion 13.5t
LOL if running brushless and 4 cells its got to be 1150g all up
Last edited by Gazza on Tue May 17, 2011 11:55 am; edited 1 time in total
Gazza- Posts : 1530
Join date : 2009-11-29
Age : 64
Location : TRACKSIDE
Re: Fusion 13.5t
Brushless system on 4 cell nimhs im still running the fusion swaped the old futaba servo out for the savox sc-0254mg and that made a hell of a diffrence havent made the jump to 1 cell lipos yet but thats mainly because i dont no what the rules are going to be and such like.
Jamie
il post my new shell soon as soon as me camera is working lol
Jamie
il post my new shell soon as soon as me camera is working lol
Re: Fusion 13.5t
As promised here is Maggie the Mardaves new look
[You must be registered and logged in to see this link.]
better pic
[You must be registered and logged in to see this link.]
[You must be registered and logged in to see this link.]
better pic
[You must be registered and logged in to see this link.]
Re: Fusion 13.5t
so is this system worth the £80 or not? also is the programme card seperate or not? loving the shell there looks very smart, still torn between that and a calibra lol.
Re: Fusion 13.5t
Yes its very worth it as the 13.5 motor is brilliant speedo i had some issues but later found it was my setup
yep the shell is awsome
yep the shell is awsome
Re: Fusion 13.5t
cheers dude will be ordering that later then decided to go with a shell from tomo anyways as long as he will send it that is
Re: Fusion 13.5t
Yeah no worries just private message me on here to let me know which shell it was you wanted and when you want it along with address etc
Permissions in this forum:
You cannot reply to topics in this forum
|
|