New ESC

Viper R/C Solutions


[You must be registered and logged in to see this image.]

Viper R/C is proud to announce the new VTX1 Sensored Brushless ESC. The VTX1 all aluminum case disperses heat without the use of a fan. It comes preloaded with eight profiles which are all customizable for different applications. Or add your own profile for a track or track condition. The VTX1 is designed for 1/12 and 1/10 scale on road applications without radio receiver pack. It is also a perfect option for competitive 1/10 off road racing. The top of the line power FETs in the VTX1 will provide ultra-low resistance for blinking mode races. Its sophisticated boost timing firmware will be your best choice to the podium finishes. Check on line hobby shops or your local hobby shops for the pre-order status!!


Features:

■True sensored system
■ 1~2S LiPo Support without radio receiver pack
■Smart Brake System setting by motor RPM and curve profiles
■Dynamic timing boost for competitive track conditions
■High resolution setting (100 steps in most key parameters)
■Battery cut off, ESC temperature, and motor temperature protection
■LED indicator for STOCK/MODIFIED class race
■Auto time-out power off
■ProGauge Multi-Function Meter included
■V-LINK Software for firmware upgrade and PC interface set up (link device sold separately)
■8 Default standard set up profiles that allow quick set up without ProGauge

Ask dazzler what he thinks of the viper electrics lol

well spotted gazza... mine is already on a plane!

mine is all good now i have found the go.faster button.

i doubt you will find better made kit and the staff are awesome

Mine has arrived in the UK

Will let you know how my R&D goes and will let you all know when its released, come and find me if you want to see one first hand

I was emailing the company direct last week - these seem a really nice little unit and could be perfect for 1s LiPo racing.

My main question was to do with how (if at all) they boosted the input battery voltage to the receiver, servo and PT. A chap called Willie was replying to my emails and said that, "you will get stable voltage output from 4.5V to 5.5V depending on your setting, The BEC controller is capable to handle 3A." That sounds really promising, a bit like a HobbyWing, LRP SXX or Nosram Pearl.

Dazzler, if you could confirm this with your speedo when you get it wired in I would appreciate it - just measure the voltage across the + and - pins on the receiver and let us know what it it.

Like I said, it all looks good for more 1s LiPo racing and the more choics we have the better!

James

Hi James, i will check out the voltage when its all up and running, its expected to be on my door step tomorrow or weds

Its here, will get it fitted and let you all know

[You must be registered and logged in to see this image.]

That looks cool dazza

Dazzler,

Any luck trying that voltage test?

James

Hi James i hope to have it fitted over the weekend will let you know.. should be doing rack testing at Ardent Tuesday